background image

Continuous Rating (W)

Voltage (V)

Cycle (Hz)

Input

Output

Max. Output(W)

110
115
120
220
230
240

Models No.

 Description

PRODUCT

Current (A)

T

ECHNICAL INFORMATION

C

ONCEPTION AND MAIN APPLICATIONS

 

S

pecification

P 1 / 4 

DC1413

LG125 (for Dolmar brand)

Charger

H

L

W

Dimensions : mm  ( " )

Width ( W )

Height ( H )

Length ( L )

193 (7-5/8)

78 (3-1/16)

  92 (3-5/8)

50 / 60
50 / 60
50 / 60
50 / 60
50 / 60
50 / 60

60 
60 
60 
60 
60 
60

Output voltage : V

Output current : A

Charging time : minute

Ni-Cd battery of 1.3Ah

Ni-Cd battery of 2.0Ah

Ni-MH battery of 2.6Ah

Ni-MH battery of 3.0Ah

7.2,  9.6,  12,  14.4

2.6

Approx. 30

Approx. 45

Approx. 60

Approx. 70

Protection of circuit from over current

by Fuse

Both of Ni-Cd and Ni-MH batteries from 7.2V to 14.4V 
can be charged with DC1413 (LG125), in shorter time 
comparing with the existing charger DC1411.
Its maintenance (trickle) charging system keep the full charged
condition, even if the battery is left in this charger after
finish of charging process.

Summary of Contents for DC1413

Page 1: ...60 60 60 60 Output voltage V Output current A Charging time minute Ni Cd battery of 1 3Ah Ni Cd battery of 2 0Ah Ni MH battery of 2 6Ah Ni MH battery of 3 0Ah 7 2 9 6 12 14 4 2 6 Approx 30 Approx 45 Approx 60 Approx 70 Protection of circuit from over current by Fuse Both of Ni Cd and Ni MH batteries from 7 2V to 14 4V can be charged with DC1413 LG125 in shorter time comparing with the existing cha...

Page 2: ...he charging process in 150 minutes after starting the charge if the full charged condition would not be perceiving with any of the above 3 systems Battery s voltage and temperature Charging time Full charged line 1 2 3 Minus delta V system Delta T system T system 1 Battery s voltage 2 Heated battery s temperature It can not be charged completely 3 Battery s normal temperature in charging process T...

Page 3: ...oard can not be repaired because the circuit itself are molded on the board It has to be replaced as a set with new one 2 In case of damaged varistor or fuse they can be repaired according to the following procedure without replacing the circuit board 1 How to find broken varistor a In case that the surface of varistor ref to the following illustration has broken or has become black and fuse has b...

Page 4: ...ing iron b Assemble new fuse to the circuit board by soldering c Cut the surplus of fuse s wire with nipper b Assemble new varistor to the circuit board by soldering c Cut the surplus of varistor s wire with nipper Varistor Circuit board When removing varistor melt this part with soldering iron and remove varistor Varistor Circuit board Less than 3mm Fig 2 Fig 3 Fig 4 Fuse When removing fuse melt ...

Reviews: