8 ENGLISH
Guide scale
Use the guide scale if you wish to cut threaded rods in
the same length. Insert the guide scale into the hole as
shown in the figure.
1
2
►
1.
Guide scale
2.
Clamping screw
Align the value of your desired length on the guide scale
with the cutting line. Then tighten the clamping screw.
2
1
3
►
1.
Guide scale
2.
Cutting line
3.
Clamping screw
CAUTION:
Do not hold the guide scale to
carry or handle the tool.
The tool may fall off and
cause personal injury and/or damage to the tool.
Rod guide
For a precise cutting, set the rod guide in position
depending on the diameter of the threaded rod to be
cut.
1
2
►
1.
Rod guide (Position 1)
2.
Rod guide (Position 2)
There are two rod guide positions.
Position
Size of threaded rod
1
W3/8, 3/8-16UNC, M10
2
W5/16, W1/4, 5/16-18UNC, 1/4-20UNC,
M8, M6
Hook
CAUTION:
Never hook the tool on a windy
location or a potentially unstable surface.
CAUTION:
Do not use the hook when it is
deformed or damaged.
CAUTION:
When not operating the tool,
always fold the hook.
The hook is convenient for hanging the tool temporarily.
1
►
1.
Hook
CAUTION:
Do not hang the hook from the
waist belt.
It may result in personal injuries and/or
damage to the tool if dropped.
