17
ENGLISH
NOTE:
If the suction force does not recover even
after disposing of the dust and cleaning the mesh
filter, check whether dust has accumulated in the
capsule of the cleaner or clogging has occurred.
NOTE:
The dust may fly up when disposing from the
cyclone attachment. Be careful not to let dust get into
your eyes.
Cleaning
When the dust case becomes dirty or the mesh filter is
clogged, remove and wash them with water. (Refer to
“Disposing of dust” for the removal procedure.)
NOTICE:
After washing the dust case and filters,
dry them thoroughly before use.
Insufficiently dried
components may cause electric shock and/or injury.
►
Fig.47:
1.
Dust case
2.
Mesh filter
When the mesh filter gets dirty badly, clean it in the
following procedures.
1.
Turn the mesh filter as shown in the figure and
remove it while the hooks are unlocked.
►
Fig.48:
1.
Mesh filter
2.
Hook
2.
Remove the dust on the mesh filter and then wash
it with water. After that, dry it thoroughly.
3.
Insert the mesh filter into the base while the hooks
are aligned with the port. Turn the mesh filter as shown
in the figure until the hooks are locked with a click.
Make sure that the mesh filter is installed securely.
►
Fig.49:
1.
Mesh filter
2.
Hook
3.
Port
Summary of Contents for CL117FD
