P
9
/1
3
ASSEMBLING
Gear ass’y
Switch unit
Housing R
Motor section
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Motor section and Gear ass’y
Note:
Ribs to hold Switch unit must face
the top side of the machine.
Fig. 26
Ribs to hold
Switch unit
Motor bracket
Lead wire
of Endbell complete
Carrier complete A/ B
Internal gear 47
Gear case
Gear case
pliers
(1) Apply Makita grease N No.2 (2g) to teeth portions of all Gears and all Shaft pins portion of the Carrier complete A/ B
and Spur gear complete. (
Fig. 1
)
(2) Assemble Gear ass’y. (
Figs. 24
and
25
)
(3) Assemble Motor section. (
Fig. 22
)
Assemble Motor section and Gear ass’y together while turning Motor bracket in the direction of the arrow.
Then install Switch unit on Gear case, and connect Lead wires of Endbell complete to Switch. (
Fig. 26
)
(4) Put the assembled part of Gear ass’y and Motor section in place on Housing R, then fasten Housing L to Housing R as
drawn to
left in Fig. 22
.
Note:
Do not forget to install Plate and Lens on Housing R. (See
Figs. D-2
and
D-3
for detailed information on wiring.)
Fig. 24
Fig. 25
Lock Motor bracket in place
by turning clockwise.
Motor bracket
Lock washer
Spur gear
complete
Spur gear
15/ 19 (3 pcs)
Shaft pins for
Spur gear 13/ 18
Shaft pins for
Spur gear 15/ 19
Spur gear
13/ 18 (3 pcs)
Ball bearing
6805LLB
