P 12/16
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Clutch Section
R
epair
DISASSEMBLING
ASSEMBLING
Disassemble by taking the steps described in Fig. 32 to Fig. 36.
Fig. 33
Fig. 34
Fig. 35
Fig. 36
3) Remove Housing (R) from Housing (L)
by unscrewing nine 4x18 Tapping screws.
4) Remove Clutch section from Housing (L).
Gear complete 18-44 can be
also removed in this step.
Flat washer 26
Compression spring 25
Clutch cam C
Steel ball 4 (3 pcs)
Helical gear 48
Spindle B
Steel ball 3.5
Sleeve 20
O Ring 18
Dust cover
6) Assembly of Helical gear 48 can be disassembled
by hand as illustrated below.
Plane bearing 14
Flat washer 25 (2 pcs)
Housing (R)
Tapping screw 4x18 (9 pcs)
From the removed Clutch section,
Ball bearing 608 and Assembly of
Helical gear 48 will be separated by
the force of Compression spring 25.
Ball bearing 608
Gear complete 18-44
Housing (L)
Clutch section
Assembly of Helical gear 48
consisting of:
Helical gear 48, Clutch cam C
Steel ball 4 (3 pcs), Flat washer 26
Compression spring 25
5) The rest of Clutch section can be disassembled
by hand as illustrated below.
Fig. 37
1) Put Flat washer 26 on the flanged portion of
Clutch cam C.
Note: Make sure that there is no space between
Flat washer 26 and the flanged portion.
2) While turning Compression spring 25
in the direction of the arrow, push it down
until it touches Flat washer 26.
Compression spring 25
Flat washer 26
Clutch cam C
Assemble by taking the steps described in Fig. 37 to Fig. 40.
