background image

4. 

If electrolyte gets into your eyes, rinse them 
out with clear water and seek medical 
attention right away. It may result in loss of 
your eyesight. 

5. 

Do not short the battery cartridge: 

(1) 

Do not touch the terminals with any 
conductive material. 

(2) 

Avoid storing battery cartridge in a 
container with other metal objects such as 
nails, coins, etc. 

(3) 

Do not expose battery cartridge to water 
or rain. 
A battery short can cause a large current 
flow, overheating, possible burns and 
even a breakdown. 

6. 

Do not store the tool and battery cartridge in 
locations where the temperature may reach or 
exceed 50

C (122

F). 

7. 

Do not incinerate the battery cartridge even if 
it is severely damaged or is completely worn 
out. The battery cartridge can explode in a fire. 

8. 

Be careful not to drop or strike battery.   

9. 

Do not use a damaged battery.   

SAVE THESE INSTRUCTIONS. 

Tips for maintaining maximum battery life 

1. 

Charge the battery cartridge before completely 
discharged. 
Always stop tool operation and charge the 
battery cartridge when you notice less tool 
power. 

2. 

Never recharge a fully charged battery 
cartridge. 
Overcharging shortens the battery service life. 

3. 

Charge the battery cartridge with room 
temperature at 10

C - 40

C (50

F - 104

F). 

Let a hot battery cartridge cool down before 
charging it. 

 
 
 
 
 
 
 
 

FUNCTIONAL DESCRIPTION 

 

CAUTION: 

• 

Always be sure that the tool is switched off and the 
battery cartridge is removed before adjusting or 
checking function on the tool. 

Installing or removing battery cartridge 

3

2

1

 

 

007918 

• 

Always switch off the tool before insertion or 
removal of the battery cartridge. 

• 

To remove the battery cartridge, withdraw it from 
the tool while sliding the button on the front of the 
cartridge. 

• 

To insert the battery cartridge, align the tongue on 
the battery cartridge with the groove in the housing 
and slip it into place. Always insert it all the way 
until it locks in place with a little click. If you can see 
the red part on the upper side of the button, it is not 
locked completely. Insert it fully until the red part 
cannot be seen. If not, it may accidentally fall out of 
the tool, causing injury to you or someone around 
you. 

• 

Do not use force when inserting the battery 
cartridge. If the cartridge does not slide in easily, it 
is not being inserted correctly. 

Switch action 

1

 

 

007914 

CAUTION: 

• 

Before inserting the battery cartridge into the tool, 
always check to see that the switch trigger actuates 
properly and returns to the "OFF" position when 
released. 

To start the tool, simply pull the switch trigger. Release 
the switch trigger to stop. 

1. Switch trigger 

1. Red part 
2. Button 
3. Battery cartridge

Summary of Contents for BFL301R













Reviews: