Makita 9533, Instruction Manual

Page: 2 / 12

2
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
END202-1
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual.
...................DOUBLE INSULATION
.....................Wear safety glasses.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
For Model 9533/9533L
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. This
tool should be grounded while in use to protect the oper-
ator from electric shock. Use only three-wire extension
cords which have three-prong grounding-type plugs and
three-pole receptacles which accept the tool’s plug.
For Model 9533B/9534B
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Model 9533 9533L 9533B 9534B
Depressed center wheel diameter 100 mm 100 mm 100 mm 115 mm
Spindle thread M10 M10 M10 M14
No load speed (min
-1
)
12,000 9,000 12,000 12,000
Overall length 262 mm 262 mm 262 mm 262 mm
Net weight 1.4 kg 1.5 kg 1.4 kg 1.4 kg
Safety class Class1 Class1
/II /II