Makita 9521NB, Original Instructions Manual

Page: 2 / 12

2
ENGLISH
(Original instructions)
SPECIFICATIONS
Model 9521NB 9522NB
Depressed center wheel diameter ...................................................... 115 mm 125 mm
Spindle thread .................................................................................... M14 M14
Rated speed (n) / No load speed (n
0
) ................................................ 12,000 min
–1
9,500 min
–1
Overall length ..................................................................................... 262 mm 262 mm
Net weight .......................................................................................... 1.8 kg 1.8 kg
Safety class ........................................................................................ /II /II
• Due to our continuing programme of research and development, the specifications herein are subject to change with-
out notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-6
Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only
be operated on single-phase AC supply. They are double-insulated and can, therefore, also be used from sockets with-
out earth wire.
• Read instruction manual.
• DOUBLE INSULATION
• Wear safety glasses.
• Only for EU countries
Do not dispose of electric equipment together with household waste material!
In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its
implementation in accordance with national law, electric equipment that have reached the end of
their life must be collected separately and returned to an environmentally compatible recycling facil-
ity.