background image

6

FUNCTIONAL 
DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Switch action

CAUTION:

Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the “OFF”
position when released.

Switch can be locked in “ON” position for ease of
operator comfort during extended use. Apply caution
when locking tool in “ON” position and maintain firm
grasp on tool.

To start the tool, simply pull the switch trigger. Tool speed is
increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.

Reversing switch action

This tool has a reversing switch to change the direction of
rotation. Move the reversing switch lever to the 

 position (A

side) for clockwise rotation or the 

 position (B side) for

counterclockwise rotation.

CAUTION:

Always check the direction of rotation before operation.

Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.

ASSEMBLY

CAUTION:

Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.

1. Switch trigger

2. Lock button

1

2

003015

1. Reversing switch lever

A

B

1

003553

Summary of Contents for 6410













Reviews: