9
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and the battery cartridge is
removed before carrying out any work on the tool.
Installing side grip (auxiliary handle)
Always use the side grip to ensure operating safety.
Insert the side grip so that the protrusions on the grip base fit in between the
grooves on the tool barrel. Then tighten the grip by turning clockwise.
Installing or removing driver bit or drill bit
Turn the sleeve counterclockwise to open the chuck jaws. Place the bit in the
chuck as far as it will go. Turn the sleeve clockwise to tighten the chuck. To
remove the bit, turn the sleeve counterclockwise.
When not using the driver bit, keep it in the bit holders. Bits 45 mm long can be
kept there.
Adjustable depth rod (Optional accessory)
The adjustable depth rod is used to drill holes of uniform depth. Loosen the
thumb screw, set to desired position, then tighten the thumb screw.
1. Steel band
2. Grip base
3. Side grip
4. Protrusion
5. Groove
1
2
3
4
5
005775
1. Sleeve
1
005776
1. Bit
2. Bit holder
1
2
001900
1. Depth rod
2. Clamp screw
1
2
005777
