Makita 6305W, Instruction Manual

Page: 5 / 48

5
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
END201-2
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
................ Read instruction manual.
................ DOUBLE INSULATION
Intended use
The tool is intended for drilling in metal.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
SPECIFIC SAFETY RULES
GEB001-2
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to drill
safety rules. If you use this power tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Use auxiliary handles supplied with the tool.
Loss
of control can cause personal injury.
2. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the drill bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
8. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
1. Lock button
2. Switch trigger
3. Indicator lamp
4. Arm
5. Grip
6. Bit
7. Chuck key
8. Chuck
9. Stand base
10. Screw
11. Lever
12. Bolt
13. Protrusion of arm
14. V base
15. Shoe
16. Workpiece
17. Stopper
18. Constant distance
19. Sub shoe
20. Unstable workpiece 21. Drill holder
22. Clamper
23. Push
24. Pull
25. Clamp lever
26. Pull upward
27. Limit mark
28. Screwdriver
29. Brush holder cap
Model 6305W
Capacities Steel 13 mm
No load speed (min
-1
) 1,300
Max. drill feed 47 mm
Effective drill slide length 195 mm
Arm spacing 80 mm
Net weight 4.9 kg
Safety class /II