R
epair P 3 / 5
( 4 ) Further pull the base down, and pull out riving knife holder together with riving knife along
the flat surface of the bearing box as illustrated in Fig. 3.
And then, separate base from the motor section after taking off pin 10 which is joining base and motor section.
Riving knife
Riving knife holder
Fig. 3
* Link
Pin 10
< Note 1 >
* Link is an integral part of base.
< Note 2 >
Do not forget to join link and riving
knife holder as illustrated in Fig.1A,
when assembling.
< 3 > Disassembling gear section
( 1 ) Take off 2 pcs. of countersunk head screws M5x16. Then the gear section can be separated from blade case.
See Fig. 4. And set the gear section on the turn base of arbor press and press a round bar set on the spindle down
with arbor press as illustrated in Fig. 4A. Then, spindle can be separated from the gear section. See Fig. 4B.
Countersunk head
screws M5x16
Gear section
Fig. 4
Round bar
Max. 11mm
Minimum. 14mm
Spindle
60mm
Bearing box
Press
Fig. 4A
Ball bearing 6002DDW
Bearing box
Spindle
Helical gear 41
Ball bearing 608
Fig. 4B
Turn base of arbor press
Press
