P 5 / 7
R
epair
Referring to Fig. 7, Assemble Fig.R to Housing L.
Note: 1) Firmly insert O rings into the bottom of holes in Housing R so as not to fall off. (The bottom positions have
ribs for prevention of falling them off.)
2) Be sure to set each component in place of Housings R and L. Do not pinch Polyurethane sponge seal.
3) Do not put Leaf spring under Slider. Insert Leaf spring to the holder of Housing R so that the Leaf spring
is parallel to Slider section and vertical to Housing L.
4326, 4326M, 4327, 4327M, M438
Slider section
Slider section
Housing L
4328, 4329, M439
[7] Assembling Housings R and L
Fig. 5
O ring
Parallel
Vertical
Holder for
Leaf spring
Housing L
Slider guide
Slider support
Polyurethane
sponge seal
Polyurethane
sponge seal
with Seal
plate
