Makita 0088381891752, Instruction Manual, Page: 5 / 128

5 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: TD001G
Fastening capacities Machine screw 4 mm - 8 mm
Standard bolt 5 mm - 16 mm
High tensile bolt 5 mm - 14 mm
No load speed (RPM) 4 (Max impact mode) 0 - 3,700 min
-1
3 (Hard impact mode) 0 - 3,200 min
-1
2 (Medium impact mode) 0 - 2,100 min
-1
1 (Soft impact mode) 0 - 1,100 min
-1
Wood mode 0 - 1,800 min
-1
T mode (1) 0 - 2,400 min
-1
T mode (2) 0 - 3,700 min
-1
Bolt mode (1) 0 - 2,500 min
-1
Bolt mode (2) 0 - 3,700 min
-1
Bolt mode (3) 0 - 3,700 min
-1
Impacts per minute 4 (Max impact mode) 0 - 4,400 min
-1
3 (Hard impact mode) 0 - 3,600 min
-1
2 (Medium impact mode) 0 - 2,600 min
-1
1 (Soft impact mode) 0 - 1,100 min
-1
Wood mode 0 - 4,400 min
-1
T mode (1) -
T mode (2) 0 - 2,600 min
-1
Bolt mode (1) -
Bolt mode (2) 0 - 4,400 min
-1
Bolt mode (3) 0 - 4,400 min
-1
Rated voltage D.C. 36 V - 40 V max
Overall length 120 mm
Net weight 1.7 - 2.0 kg
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4025 / BL4040
Charger DC40RA
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.