![background image](http://html.mh-extra.com/html/makita/0088381873819/0088381873819_instruction-manual_229984011.webp)
11 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DHR182
Capacities
Concrete
18 mm
Core bit
35 mm
Diamond core bit (dry type)
32 mm
Steel
13 mm
Wood
24 mm
No load speed
0 - 1,350 min
-1
Blows per minute
0 - 5,000 min
-1
Overall length
301 mm
Rated voltage
D.C. 18 V
Net weight
2.4 - 3.2 kg
Optional accessory
Model:
DX05
Suction performance
250 l/min
Operating stroke
Up to 90 mm
Suitable drill bit
Up to 160 mm
Net weight
0.9 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-6:
Model DHR182
Sound pressure level (L
pA
) : 91 dB (A)
Sound power level (L
WA
) : 102 dB (A)
Uncertainty (K) : 3 dB (A)
Model DHR182 with DX05
Sound pressure level (L
pA
) : 91 dB(A)
Sound power level (L
WA
) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared val
-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
Summary of Contents for 0088381873819
