MCP-6-SS
– User Manual
Page 3 of 21
SAFETY INFORMATION
GENERAL SAFETY INFORMATION
WARNING
Read this manual
thoroughly
before using your MCP. Failure to
follow instructions could result in serious injury or death
.
WARNING
Instruct operators in care and use of the product before use!
WARNING
Keep children away from MCP at all times.
•
ALWAYS
ensure the applied load does not exceed the rating of the installed breaker.
•
ALWAYS
disconnect the MCP from mains when carrying out any maintenance.
•
ALWAYS
plug in the MCP
BEFORE
applying loads.
•
ALWAYS
test the
RCBO’s before use.
•
ALWAYS
check the MCP electrical leads for damage before use.
•
ALWAYS
position electrical leads so that they will
NOT
create a tripping hazard.
•
NEVER
allow children or animals near the MCP.
•
NEVER
alter or tamper with the internal wiring of the MCP.
•
NEVER
operate in wet conditions.
•
NEVER
climb or stand on the MCP.
MCP POSITIONING FOR SAFE USE AND HANDLING
•
ALWAYS
leave at least a 400 mm gap between the front of the MCP door to any
surrounding building or structure to allow the doors to open.
•
ALWAYS
ensure the MCP is on a solid, flat surface.
•
ALWAYS
ensure the surrounding area is free from anything that could burn or
damage the MCP.
•
ALWAYS
activate the brakes when MCP is in position.
•
NEVER
tilt the MCP.
•
NEVER
attempt to lift or move the MCP without the assistance of other persons or
suitable lifting equipment.
•
Keep the unit horizontal when fork or sling loading/unloading
