Revision 1 10/04/15
Tool Inspection Process:
Step Action
1
Visually check for dents/cracks as well as broken, missing or worn parts.
2
Check to ensure all bolts are secure and tightened or replace them if necessary (specific torque rating needs to be applied).
3
Check Blade is correctly assembled and sits flush against the back of the Tile Smasher Head, adjust or replace if needed.
4
Check there is nothing obstructing the tapered hole where the shank is to be fitted.
Tool Cleaning & Maintenance Process:
Step Action
1
Use compressed air to blow off excess dirt / dust.
2
Clean off any grease or surface grit.
3
To replace worn blades/bolts, use an impact gun (A).
4
Set the torque wrench to 64lb/ft and apply to all three bolts after screwing them in place (B).
5
Wipe of Wipe off tool with clean dry rag.
TILE SMASHER HEAD (TSH)
MAINTENANCE GUIDE
Supplier Support #:
US Only
: 407-446-1966
,
407-826-0000
Supplier Website:
www.makinexusa.com
PURPOSE
Follow the directions below to ensure that the Tile Smasher Head is in working order and properly
maintained.
SAFETY
Always wear approved eye and ear protection when working with air tools.
DO NOT USE if parts are faulty.
(A)
(B)
