Operation and Safety Guide
Tile Smasher Attachment for
MAKINEX Jackhammer Trolley
Created by: Michael Chen
Revision Level: 2
Company: Makinex
Revision Date: 10/04/15
SAFETY TOPICS:
Read and understand the operator’s
Manual, or “Operations and Safety Guide”
before using this machine. Failure to
follow operating instructions could
result in death or serious injury.
SAFETY CHECKLIST:
ALWAYS
wear safety goggles, ear
protection and hard toe shoes when
operating with this equipment.
ALWAYS
ensure machine is switched
OFF
before plugging in.
ALWAYS
ensure the Tile Smasher Head is
correctly inserted and positioned before
use.
ALWAYS
inspect the Jackhammer Trolley
for any signs of damage before use.
do not
use if it appears damaged.
DO NOT
wear loose clothing while
operating this machine. Loose material
may become caught in the mechanism.
DO NOT
touch the Tile Smasher Head
whilst the machine is in operation.
DO NOT
operate if you have a known
medical condition which may affect your
ability to safety operate the Jackhammer
Trolley.
DO NOT
use as a levering device
ALWAYS
maintain a correct stance while
operating the Jackhammer Trolley to avoid
injury.
ALWAYS
use on a flat, level surface.
ALWAYS
use a dedicated power supply
with an extension cord that does not
exceed 30 feet in length.
ALWAYS
switch
OFF
the machine before
unplugging.
Tool Application:
The MAKINEX Jackhammer Trolley Tile Smasher
attachment is used for lifting and removing tiles from wooden and concrete
surfaces and for cleaning tile beds. It can also be used for removing vinyl and cork
flooring.
Tool Setup:
Step
Action
1
Lean the Jackhammer Trolley on its back with the hammer facing
up to get a comfortable working position, then insert the shank into
the hammer
(A).
2
Position the Tile Smasher Head horizontally and gently tap onto the
shank so it will not fall off
(B).
3
Position the Jackhammer Trolley upright and check if the entire
front edge of the blade on Tile Smasher Head is flush against the
ground
(C).
4
Once that is confirmed, tap the Tile Smasher Head firmly onto the
shank and then return to upright position
(D).
Tool Operation:
Step
Action
1
Ensure Tile Smasher is mounted correctly and the jackhammer is
properly secured in the clamping mechanism of the trolley and
cannot rotate.
2
Never allow Jackhammer or Tile Smasher to overheat.
(Refer to
Jack Hammer manufacturer for continuous usage guidelines).
Take regular breaks to avoid user fatigue and wear on hammer.
3
Turn on the power switch of the Jackhammer.
4
Place both hands on handle and place a foot on the footrest,
adjust to a desired angle.
5
Maintain a straight back and proceed in a slow, steady linear
motion while operating the Jackhammer Trolley
(E).
(C)
Vendor Website: www.makinexusa.com
Makinex USA Support #: 407-446-1966, 407-826-0000
Forward
motion
A
B
C
D
E
