MAKINEX GEN-23P-AU Operator'S Manual Download Page 19

GEN 

– 16P – User Manual 

 

Page 17 of 22 

LIMITED WARRANTY 

To  take  advantage  of  the  MAKINEX  limited  warranty,  you  must  have  maintenance 
performed  according  to  the  maintenance  schedule  (contained  in 

Vanguard  61E377

 

owner’s  manual  supplied  with  this  product),  by  an  authorised  MAKINEX  dealer  or 
MAKINEX service technician. You are free to have your MAKINEX product serviced by 
any  suitably  qualified  mechanic  or  electrician  (depending  on  the  mechanical  or 
electrical requirement) and this will not affect your statutory warranties, however, failure 
by  the  owner  to  have  the  recommended  servicing  carried  out  by  an  authorised 
MAKINEX  dealer/service  technician  means  that  you  cannot  take  advantage  of  the 
MAKINEX limited warranty. 

MAKINEX  warrants  each  new  generator  to  be  free  from  defects  in  material  and 
workmanship  under  normal  domestic  and  industrial  use  and  service  for  the  period 
specified below, conditional to the limitations and exclusions printed on this page. This 
warranty  applies  only  to  new  MAKINEX  generator  distributed  by  us  and  by  our 
authorised MAKINEX dealers. 

Under the limited warranty and at MAKINEX’s discretion, upon evaluation, inspection 
and  testing  by  a  MAKINEX  dealer  or  a  MAKINEX  service  technician,  MAKINEX  will 
repair and replace of defective part(s). 

AUSTRALIA:  Our  goods  come  with  guarantees  that  cannot  be  excluded  under  the 
Australian  Consumer  Law.  You  are  entitled  to  a  replacement  or  refund  for  a  major 
failure and compensation for any other reasonably foreseeable loss or damage. You 
are  also  entitled  to  have  the  goods  repaired  or  replaced  if  the  goods  fail  to  be  of 
acceptable quality and the failure does not amount to a major failure. 

WARRANTY: (Ex-factory/ Reseller premise) 

MAKINEX warrants to the original purchaser: 

  Frame  and  all  Electrical  components  will  be  free  of  defects  in  material  and 

workmanship for a period of one year from the original date of purchase.  

  Vanguard Engine is subject to 3 years warranty.  

o

  Please see www.briggsandstraton.com for details. 

  3 years warranty on RFL alternators 

 

 

Summary of Contents for GEN-23P-AU


























Reviews: