KF-35
makfa
www.makfa.com
2
0
CLEAR
1
2
3
4
5
6
7
8
9
LOCK
Close:enter 3-6 digits,press LOCK
Open:enter same code
0
CLEAR
1
2
3
4
5
6
7
8
9
LOCK
Close:enter 3-6 digits,press LOCK
Open:enter same code
0
CLEAR
1
2
3
4
5
6
7
8
9
LOCK
Close:enter 3-6 digits,press LOCK
Open:enter same code
After closing the case lid by pushing, enter a password
with a minimum of 3 and a maximum of 6 digits, which
you will determine, and press the 'LOCK' button. Your
case will be locked when 'CLOSEd' appears on the screen.
Enter the password you used to lock the case while
the case is locked. Your case will open when 'OPENEd'
appears on the screen.
If the password you entered is incorrect, you can
clear the screen by pressing the 'CLEAR' button.
POSITIONING
FACTORY SETTİNGS
LOCKING AND UNLOCKING
Inside the case, there are 4 holes, 2 at the back and 2 at the bottom. Place the case in the
desired location, and perform the assembly using anchors and screws. It is important to
mount the case in a stable and immobile position. Additionally, ensure that the case is level
during assembly. This will affect the comfort of opening and closing the lid.
The case lids are shipped open. However, if they are to be shipped locked,
the cases are locked with the code 123456.
The Master Code is registered as 000000. This code must be changed immediately
upon receiving the case. Refer to 'Page 3' for instructions. Since resetting is a
complex process, it is essential not to forget the new code after it has been
changed. See 'Page 4' for details.
Summary of Contents for KF-35
Page 1: ...USER MANUAL KF 35...
