MakerPi P2, Quick Start Manual, Page: 5 / 21

2
1.2 Cautions
1.The nozzle temperature can reach temperatures greater than
200
℃
while printing and remains hot for a period of time during
cool down after the completion of a print. Take caution while
removing your printed model - do not touch the nozzle with your
hand
；
2.Please follow the instructions in the guide while operating this
machine. If you have any questions contact your reseller or the
MakerPi after-sales department
；
3.If support material needs to be removed from the printed
model, please wear gloves so as not to be hurt by tools or the
support material during the clean-up process
；
4.Reading the "User guide", while actually operating the
machine will be more conducive to your operation as you
become familiar with the printer
；
5.If you encountered a problem with a print or a machine part,
please take a photo that represents the problem and another
with the machine identification number (the label at the bottom
back of the machine), and then contact our after-sales support
or your reseller
；
6.The use of original factory filament is recommended
；
7.If your machine does not power on check the power supply
under the machine and select the appropriate voltage for your
region.