MAKERGEAR M3-SE, User Manual

Page: 4 / 20

3. To protect against electrical shock, do not put the printer body,
cord, or electrical plug in liquid. If the printer falls into liquid, do not
touch it. Instead, unplug the printer from power outlet, then remove
it immediately. Do not reach into the liquid without unplugging the
4. This printer should not be used by children unless supervised by an
adult who understands the risks and precautions involved in its use. To
avoid potential injuries, close supervision is necessary when the printer
is used by or near children.
2. Unplug the power cord when the printer is not in use. To unplug,
grasp the plug and firmly pull it from power outlet. You should never
5. Avoid any contact with moving parts. The printer can move quickly,
so stay clear to avoid being struck or pinched.
6. Keep hands/hair/clothing away from printer attachments while the
printer is operating to reduce risk of injury to persons and/or damage to
7. Do not operate the printer if it has a damaged cord/plug, is
malfunctioning, or has been dropped or damaged in any way. If
you are having any problems with the printer (such as temperature
errors, unexplained shutdowns, or other erratic behavior), unplug
the printer from power outlet and contact support. Do not operate a
1. The following safeguards exist to ensure the safety of users and to
avoid potential risks. Ignoring these safeguards can cause damage to
the printer and its environment.
8. Keep area around the printer clear. The heated build platform moves
horizontally and vertically and may cause the printer to move or dam-
age other equipment if it strikes them.
2
Important Safeguards