MAK
E
R
B
OT
S
K
E
TC
H
MAN
U
AL
PA
G
E
2
0
MATERIAL
Select the
[Material] icon to load or unload material.
For material best practices, see Chapter 3, Guided Setup.
TO LOAD MATERIAL
1.
Cut the end of your material to create a clean edge
2.
Use the touch screen to select
[MATERIAL > LOAD]
3.
Follow the instructions on the screen
TO UNLOAD MATERIAL
1.
Use the touch screen to select
[MATERIAL > UNLOAD]
2.
Follow the instructions on the screen
3.
Rewind the material onto the spool and store in a dry place.
If you are changing material spools, make sure to keep the spool tightly wound as you pull the material free of the
guide tube. If you do not, the material could unravel or tangle on the spool.
NOTE: When you are not using a material spool, make sure the free end of the material is inserted into one of the
storage slots of the spool. This allows you to find the insertion end of the material much faster and will prevent the
spool from tangling.
SETTINGS
Select the
[SETTINGS] icon to personalize your MakerBot Sketch, edit network or sharing settings, update firmware,
access calibration, and other tools.
NETWORK
Under network, you can connect your printer to a Wi-Fi network, Ethernet and also authorize MakerBot accounts to
the printer.
WI-FI
Select
[WI-FI] to begin the setup process of connecting your MakerBot Sketch to a WiFi connection. When you select
[WI-FI], the MakerBot Method will show the available WiFi networks. Select the WiFi network that you would like to
connect to and enter a password if required.
ETHERNET
Select this option if you would like to use an ethernet cable to connect to the internet.
MAKERBOT ACCOUNT
Sign in with your MakerBot account to add this printer to your printer list. if you do not have a MakerBot account,
please visit MakerBot.com to create an account.
PREHEAT
Preheating allows you to heat your nozzle or build plate before printing or for maintenance.
UTILITIES
Select this to access the printer’s utilities and options
