5
MakerBot Replicator
MakerBot
MakerBot Rep
Remove the three (3) socket caps
screws attaching the Carriage
Assembly to the Carriage Adapter.
Note
: This step only necessary
if you troubleshooting the LCD
screen or Hoboken PCB
Gently lift carriage upwards and
wiggle to unsnap from the carriage
mount.
To disconnect the LCD Screen lift
the brown tab on the back of the
Hoboken PCB and gently pull out
the LCD Screens’ ribbon cable
and lift the LCD Screen off of the
Hoboken PCB.
Note
: The LCD Screen is not
glued to the Hoboken PCB it’s
held by pressure.
Step 6 - Remove Carriage
Assembly
Step 5 - Disassemble
the UI (Optional)
Using a small tool, a small flat
head or a pair of small tweezers
will work, unplug the FFC from the
carriage by pushing on the tabs on
either side of the cable.
