B O T M O B I L E
11
Gearbox & Rear Axle
Following parts are required to complete the steering assembly:
-
All parts from the following stl files printed as per description in chapter 2
o
Axle&Bearing_Clips.stl
o
AxleGear.stl
o
GearboxShell.stl
o
Gears.stl
o
GearboxBrushmotor_supports.stl
or
o
GearboxBrushlessmotor_supports.stl
-
Brush or brushless motor as per source list
-
2x 608 skateboard bearings (22x7x8mm)
-
1x M3x15 Button Hexagon Socket Screw
-
1x M3x10 Cap Hexagon Socket Screw
-
1x M3x30 Cap Hexagon Socket Screw
-
Brushless only:
o
Pinion gear as per source list / suggested GWS brush motor
comes with pinion gear pre-installed
o
2x M3x4 Button Hexagon Socket Screw / suggested GWS brush
motor comes with suitable mounting screws