31
Power supply LED does not light up
Battery has no power
Incorrect battery installation
Static electricity causing abnormality
Try again after charging battery for half an hour or longer.
Battery is installed in the incorrect postion. Re-install
the battery correctly and confirm that battery is installed
properly.
Static electricity may cause an abnormal shutdown. Remove
the battery to reinstall.
Fail to take off
Power supply is insufficient
Protective cover is not removed
Power module is installed in the wrong direction
After successful connection to the application, you may
check the power supply level in the control interface. If power
supply is less than 20%, please charge the battery.
Protective cover must be removed for Aircraft mode.
Protective cover is only applicable for using Hovercraft mode.
Check all power modules; the foot pad side must be facing
downwards.
Common Problems