4
Electrocution hazard!
bus board connection cable.
Do not touch any electrical terminals when attaching any Eurorack bus board cable.
The Make Noise Rosie is an electronic music module requiring 45mA of +12VDC and 40 mA of -12VDC
regulated voltages and a properly formatted distribution receptacle to operate. It must be properly installed
into a Eurorack format modular synthesizer system case.
Go to
http://www.makenoisemusic.com/
for examples of Eurorack Systems and Cases.
-12V
To install, find 8HP in your Eurorack synthesizer case, confirm proper installation of included eurorack bus
board connector cable on backside of module (see picture below), plug the bus board connector cable into
the Eurorack style bus board, minding the polarity so that the RED stripe on the cable is oriented to the
negative 12 Volt line is indicated by the white stripe.
Always turn the Eurorack case off and unplug the power cord before plugging or unplugging any Eurorack
Please refer to your case manafacturers’ specifications for location of the negative
supply
Summary of Contents for Rosie
Page 1: ...v2 3...
