16
■
Manual Brake
As well as an electromagnetic brake, squeeze the brake lever to apply the brake and then
release the lever to release the brake. The manual brake tightness can be adjusted by the
brake cable adjuster near the left hand side wheel.
■
Starting and Driving
1. Make sure the seat is installed properly.
2. Make sure the tiller has been secured properly.
3. Fold down the armrests so you can rest your arms on them.
4. Turn the power switch to “ON”.
5. Check battery indicator to see whether there is enough power for your journey. If you
have any doubt about the remaining power, please recharge the batteries before
departure.
6. Set the speed dial to a position you feel safe and comfortable with.
7. Check the forward/reverse speed lever works correctly.
8. Make sure the electromagnetic brake works correctly.
9. Make sure it is safe around you before you drive on the street. Engage the 4mph switch
if you are driving on the pavement.
Attention
1. Do not push both RH & LH sides of the speed control lever simultaneously.
2. This might leave you unable to control your scooter.
3. Do not turn the power switch to OFF while driving as this will lead to an emergency
stop and possible risk of accident and injury.
4. Do not set to the highest speeds whilst driving indoors.
5. Do not adjust the speed dial whilst driving, a sudden change in speed may cause
danger to you and others, and may cause damage to your scooter.
6. Do not place magnetic devices near the area of the operation handle as this could
affect the safe operation of your scooter.
7. Do be careful whilst driving in heavy traffic or crowded areas.
8. Whilst reversing the vehicle, beware of people or objects behind you.
5 . D R I V I N G O N T H E R OA D
