7
Basic Operation
Instructions Guide
Please note that the instructions within this manual will refer
to the radio button number e.g (
Ref.*X*
) in accordance to the
diagrams on pages 2-3 or the remote (
Rem. *X*
) on pages 4-5.
Starting up your internet radio
Plug the adaptor connector into the back of the system labelled
‘DC in’ (
Ref.3
) and turn the power on from the mains. Press the
Power button (
Ref.1
) at the back of the adapter to switch on and
to display ‘MAJORITY’ on the screen.
After the welcome screen, you will be able to select your chosen
language with the remote control. To confirm the choice, press
the ‘OK’ button on the remote (
Rem.4
)
If this is the first time of using your radio adapter, you will get
the option to set up your WiFi to stream Internet Radio with
the message “Enable ‘Check Network when Power On’?”. At this
point, select YES with the remote’s OK button to go to the next
stage.
The screen will then display “Would you like to configure
network now?”. If you select YES, your adapter will begin to scan
for nearby networks to connect to.
If you select NO then you can set this up later in configuration
settings.
Please follow the next pages in the manual for help with setting
up.
