5
In working mode and off standby, press the ‘Power/Source’
button (
Ref.1
) to switch the mode to DAB Radio. On first use it
will automatically scan all stations and save them.
Fully extend the antenna (
Ref.15
) to ensure the best signal is
being received for the scan.
If the unit hasn’t automatically scanned or you would like to
rescan the available stations, press the ‘Scan’ button(
Ref.6
) and
then release. This would also be advisable if you are having
trouble listening to particular stations.
Once you have chosen to scan, the radio will display “Full Scan”
as it starts scanning up the frequency band and store stations.
Once the scan is complete, the first radio station with good
signal will begin to play.
To browse through all of the stations that have been stored, use
the ‘Next’ and ‘Prev’ buttons (
Ref.7/8
) to scroll through them.
Once you have found your desired station, press the ‘Select/
Snooze’ button (
Ref.5
) to confirm your choice.
When listening to a DAB station, you can access station
information by pressing the ‘Info/Menu’ button (
Ref.3
)
repeatedly to view information available (See page 7)
When you power up the radio again after switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
DAB/DAB+ Radio
Instructions Guide
