Please note all (Ref.) refer to Page 1 Controls and Functions mapping guide.
Basic Operation
Plug the connector into the back of the system labelled DC 5V
(
Ref.15
) and the power supply into the mains.
Ensure the antenna (
Ref.13
) is extended as far as possible so
that you can rotate it. This will enable you to get the best signal
possible.
Press the ‘Standby/Mode’ button to turn on the unit (
Ref.1
). It
will automatically take you to DAB radio mode or to the previous
mode that you were using. When DAB Radio is activated for the
first time it will automatically start scanning and storing all
stations that have a good signal. If scanning does not
automatically start, press and
hold
the ‘Enter/Scan’ button
(
Ref.5
). To scroll through the stations use the ‘Previous’ or ‘Next’
buttons (
Ref.4/6
). Press the ‘Enter/Scan’ buttons (
Ref.5
) to listen
to a station.
To change the mode, press the ‘Standby/Mode’ button (
Ref.1
).
This will switch between DAB Radio, FM Radio.
Standby
To place the music system in standby, press the ‘Standby/Mode’
button (
Ref.1
). To turn off fully, press and
hold
the ‘Standby/
Mode’ button (
Ref.1
) and switch off at the mains. The cord must
be out of reach of children.
Instructions Guide
4
