The device will display on your Bluetooth device as “Majority Fitzwilliam”. Select the radio from your device
and the connection will begin.
Select your chosen audio on your device and play.
Once connected, skip, play and pause the playing audio from the unit, remote control, or from your device.
AUX-In Mode
Press the ‘Mode’ button on the unit
(Ref.4)
or on the remote
(Ref.37)
repeatedly until AUX-In mode is
selected.
You can connect your phone or tablet with an AUX 3.5mm cable that connects to the Audio-in jack on the
back of the unit
(Ref.17)
.
Connect the AUX cable from the back of the Fitzwilliam into the device that you wish to play media from.
You can now begin playing media from your device. Ensure that the volume on the device is switched up for
the best sound quality.
Note:
When using playback in AUX mode, the buttons on the remote control and on the
Fitzwilliam unit cannot be used to control media.
Dual Alarm Setting
Setting Alarm 1/Alarm 2
To set an alarm, select the ‘Alarm’ button on the remote control
(Ref.12)
or on the unit. Select ‘Main Menu’
and ‘Alarms’ to open alarm settings. Select Alarm 1 or Alarm 2 with the navigation dial
(Ref.3)
or OK button
on the remote
(Ref.40)
to begin setting an alarm:
Enable:
Choose the frequency of your alarm (Daily, Once, Weekends and Weekdays). If “Once” is selected, the
date and time of the alarm will need to be set. Select ‘Off’ to turn off the alarm.
Time:
The hour digits of the alarm will now begin to ash. Change the alarm hour with the Navigation dial or
Up/Down buttons
(Ref.29/Ref.41)
. Press down the dial or the OK button to con rm. Follow the same steps to
set the alarm minutes.
Mode:
Select between the following alarm wake-up tones: Buzzer, Internet radio, DAB and FM.
Preset:
If internet, digital or FM radio is selected as your alarm tone, the station you last listened to on this
mode or one of your preset favourites can be set as your alarm tone.
Volume:
Use the Navigation dial or Up/Down buttons on the remote to scroll to your chosen alarm volume.
Con rm the volume by pressing down the dial or the OK button.
Save:
Once the above features have been set for the alarm, select ‘Save’ with the Navigation dial or OK button
to con rm. Once set, an alarm icon will display on the standby screen.
Setting: Alarm Features
How to Cancel Your Alarm
Cancel the alarm before it sounds by pressing the ‘Alarm’ button on the remote control
(Ref.34)
or use the
‘Menu’ button on the unit. Select ‘Main Menu’ then ‘Alarms’ to open alarm settings.
Select the alarm that you would like to cancel (Alarm 1 or Alarm 2) with the navigation dial
(Ref.3)
or the OK
button
(Ref.40)
. Select “OFF”. Save and con rm alarm switch off by pressing down the Navigation/OK dial or
the OK button.
