MAJORITY Fitzwilliam 3, User Manual

Page: 11 / 222

EN
11
Connecting using the WPS button on your router
Connecting using the WPS (Wi-Fi Protected Setup) button on your router is a quick
and easy way to connect your radio without having to type in a password. Select one
of the following connection methods:
Push button
If your router has a WPS button, you will notice [WPS] at the front of your network
name.
6.
Press
1 2 w s 3
buttons to select Push Button. Press the SELECT button to
confirm.
7. You will now see a message on the screen telling you to press the WPS button
on your router. Press the WPS button on your router. Check your routers
instruction manual if you are unsure which button is the WPS button.
8. Press the SELECT button to confirm. Your radio will now connect to your router,
this may take a few seconds.
Pin (code number)
The radio generates an 8-digit code number. Enter this code number into the wireless
router or access device.
Connecting using your wireless network password
If your router has no WPS button you will now be asked to enter your wireless
network password, or you can select SKIP WPS which also takes you to the password
screen.
9.
Press
1 2 w s 3 7 8
buttons to select each letter/number of your password.
Press the SELECT button to enter the selected letter/number.
10. When you have entered your password, Press
1 2 w s 3 7 8
buttons to
select OK on the right of the screen.
11. Once your radio has been connected, press the SELECT button to exit the
setup.
The Network Settings can be changed at any time in the Menu - System Settings –
Network – Network Wizard
Getting Started