6
DAB / DAB+ Radio
Instructions Guide
Press the ‘Mode’ button (
Ref.6
) to switch to DAB Radio.
Fully extend the antenna (
Ref.4
).
On first use, press the ‘Scan’ button (
Ref.5
) and then release. This
will start scanning up the frequency band and store all stations
that have good signal.
The radio will automatically save all the stations with a strong
signal, up to 240 MHz. After searching has finished, it will
automatically play the first station stored.
To listen to all stations that have been stored, twist the ‘Tuning/
Play/Pause/Enter’ dial (
Ref.14
) to scroll through them. Press the
‘Tuning/Play/Pause/Enter’ dial (
Ref.14
) when on the required
station.
The radio will display station information when you press the
‘Menu/Info’ button (
Ref.2
). Press multiple times to view all
information available (See page 11).
When you turn the radio on again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
In DAB mode, the radio will synchronize with the time and date
of the station.
