8
Instructions Guide
You will need: An audio source with an Optical Audio Output and a Digital
Optical Audio cable (not included)
Connect the Digital Optical Audio cable to the optical output
on the audio source and to the Optical Input on the speaker bar
(
Ref.8
)
Press the POWER button on the soundbar (
Ref.1
) or POWER
button directly on the remote control (
Ref.10
) to switch on the
unit.
Press the MODE button on the remote control (
Ref.18
) to switch
to Optical mode or select the Mode button (
Ref.2
) on main unit
repeatedly to select the Optical mode.
Using the native controls on your connected device, make
sure the audio settings are set to PCM or Optical Audio and are
turned On. Audio from the connected audio source will now be
played through the speakers.
Rear view of the unit
OPTICAL cable
O
PT
IC
AL
OPTICAL IN
Fixing your Soundbar: Using the Optical Input
