www.major-equipment.com
22
USD-GA1
040621
Lubrication schedule
Use EP2 type grease or equivalent.
Use oil which conforms to 85W/140 standards.
Grease points Initially
25 hours
40 hours
80 hours
400 hours
All PTO Shaft Yoke Ends
●
●
PTO tubes
●
●
Check oil levels in the gearboxes
●
Replace oil in gearboxes
●
Wing eye pivot
2
●
●
Spinning undersole disk
10
●
●
Hydraulic Ram
4x2
●
●
Roller stub axles
6
●
●
Castor wheel pivot
2
●
Castor wheel axle
2x2
●
Spinning Undersole Disk
(if applicable)
The Disk should be able spin freely. Slight side-to-side rocking motion is
allowed.
In order to adjust the disk please do the following:
• Remove the assembled Spinning Undersole Disk (USD-GA1) from the
machine;
•
Remove seal (Item 7);
•
Tighten up the lock nut (Item 8) if required;
•
Place the seal back in position;
• Bolt the assembled unit (USD-GA1) back to the machine.
