Major tech MTi13, Instruction Manual

Page: 6 / 36

6
• Do not make holes in the battery with objects. Do not hit the battery with
a hammer. Do not step on the battery, or apply strong impacts or shocks
to it.
• Do not put the battery in or near a fire, or in direct sunlight, or other
high-temperature locations. Do not solder directly onto the battery.
• Always charge the battery in the specified temperature range.
• The temperature range through which you can charge the battery is 0 to
50°C (32 to 122°F). If you charge the battery at temperatures out of this
range, it can cause the battery to become hot or to break, It can also
decrease the performance or the life cycle of the battery.
• Do not get water or salt water on the battery, or permit the battery to get
wet.
• Clean the case with a damp cloth and a weak soap solution. Do not use
abrasives, isopropyl alcohol, or solvents to clean the case or lens/screen.
• Be careful when you clean the infrared lens. Do not clean the infrared
lens too vigorously, This can damage the anti-reflective coating.
• Taking the Thermal Imager from cold to hot may cause condensation in
the thermal Imager. To protect the Thermal Imager, you should switch off
the Thermal Imager, wait until the Thermal Imager has become warm
enough for the condensation to evaporate.
• If you do not use the Thermal Imager, put the Thermal Imager in cool
and dry environment. If you store the Thermal Imager with the battery
inserted, the power of the battery will be depleted.