The MT745 features:
Introduction
Safety
Congratulations on your purchase of the MT745 True RMS Flexible AC Current
Clamp meter.
Ÿ
Auto Power OFF
Ÿ
Data Hold
Ÿ
Inrush
Ÿ
Frequency
Ÿ
Data logger
Ÿ
Backlit LCD display
Ÿ
Bluetooth wireless transmit
International Safety Symbols
This symbol adjacent to another symbol, terminal or operating device
indicates that the operator must refer to an explanation in the Operating
Instructions to avoid personal injury or damage to the meter.
!
This symbol adjacent to one or more terminals identifies them as being
associated with ranges that may, in normal use, be subjected to
particularly hazardous voltages. For maximum safety, the meter and its
test leads should not be handled when these terminals are energized.
Equipment is protected by double or reinforced insulation.
Safety Notes
Ÿ
Do not exceed the maximum allowable input range of any function.
Ÿ
Do not use when the instruments power is off.
Ÿ
Remove the battery if the meter is to be stored for longer than 60 days.
Ÿ
Improper use of this meter can cause damage, shock, injury or death.
Read and understand this user manual before operating the meter.
Ÿ
Inspect the condition of the test coil and the meter itself for any damage
before operating the meter. Repair or replace any damage before use.
Ÿ
Use with great care when making measurements if the voltages are
greater than 25V AC RMS or 35V DC. These voltages are considered a
shock hazard.
Ÿ
If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
Cautions
