10
5. Operation
NOTES:
Read and understand all
WARNING
and
CAUTION
statements
in this operation manual prior to using this meter. Set the function select
switch to the
OFF
position when the meter is not in use.
5.1. AC Current Measurements
WARNING:
Ensure that the test leads are disconnected from the meter
before making current clamp measurements.
1. Set the Function switch to the AC Current.
2. Place the current fork around the middle of the test lead.
3. The clamp meter LCD will display the reading.
10
5.2. AC (True RMS)/DC Voltage Measurements
1. Insert the black test lead into the negative
COM
terminal and the red
test lead into the positive
VΩ
CAP
terminal
2. Automatically change between AC or DC
3. Connect the test leads in parallel to the circuit under test
4. Read the voltage measurement on the LCD display
CORRECT
INCORRECT
Summary of Contents for MT715
Page 1: ...INSTRUCTION MANUAL AC TRMS OPEN JAW CLAMP METER MT715 ...
Page 2: ...2 ...
Page 15: ...15 ...