3.2. Loop test
Turn the tester to 20, 200 or 2000Ω range. Push the test button, LCD will
display the value and unit, the tester will beep once after the test is over.
To get better value turn the tester to lower range as possible. If LCD flash
" " , disconnect the tester and power and make the tester cool down.
3.3. Prospective short current test
Turn the tester to 200A, 2000A or 20kA range. Push the test button, LCD
will display the value and unit, the tester will beep once after the test is
over.
To get better value set the tester to lower range as possible. If LCD flash
" " , disconnect the tester and power and make the tester cool down.
4. FEATURES
Lines test
3 LED indicates lines state. When reversed, the
third LED lights up.
Over heat protect
When the temperature of the resister is high,
the tester will cut and lock. LCD will display
"Temperature is High" and flash the flag " "
Overload protect
When the volt of P-E is up to 250V, the tester
will stop test to protect the tester and LCD will
flash "250V”
Low Battery Indication The flag " " is displayed when the battery
voltage drop below the operating voltage.
Test mode
When you press the key "test", tester will
display the result for 5's then display the
voltage.
Operating Temperature 0°C to 40°C (32°F to 104°F) and Humidity
below 80% RH
Storage Temperature
-10°C to 60°C (14°F to 140°F) and Humidity
below 70% RH
Power source
6 x AA batteries
Dimensions
200(L) x 92(W) x 50(H) mm
Weight
Approx 700g including battery .
Function
Range
4
