10. Current scene of the Thermal image frame
11. Range icon of the meter
12. Max button
13. REL button
14. PEAK button
15. DMM measurement is shown below the thermal image.
16. Unit of the meter
17. Lowest reading measured in the current frame
18. The Thermal scale shows the range color for thermal images,
The lighter the color, the warmer the temperature; The darker
the color, the cooler the temperature.
19. Highest reading measured in the current frame.
For basic operation follow these steps:
1. Set the function switch to any position.
2. Press the
IR
button to switch the
THERMAL IMAGER
ON
.
Target the object by using the thermal imager lense.
3. The display will show the temperature measurement in the upper
left hand corner for the targeted area, along with the currently
selected emissivity value.
4. In the
THERMAL IMAGING
mode, the laser pointer and display
cross hairs can be used to assist in targeting. These tools can be
switched
ON
or
OFF
in the Setting menu.
5. In the
THERMAL IMAGING
mode, the highest temperature will be
auto marked by a red cross, and the lowest temperature will be
auto marked by a blue cross, the two spots can be switched
ON
or
OFF
in the Setting menu.
6. In the
THERMAL IMAGING
mode, the meter continues to operate
normally as a Multimeter allowing any of the electrical functions to
be used.
7.
Press the
HOLD
button to freeze the thermal image frame. Press
the
HOLD
button again to capture the screen and save a bitmap
with measured data onto SD card. The saved bitmap can later be
analyzed by the PC software or smart phone APP.
5.2. Using the thermal imager
23
