16
NON
-CONTACT VOLTAGE (NCV)
The NCV function works on any rotary switch position.
1. Test the detector on a known live circuit before use.
2. Hold the top of the meter very close to the voltage
source as shown.
3. If voltage is present, the back light will flash a bright
red.
SPECIFICATIONS
Technical:
Insulation:
Class2, Double insulation.
Over voltage category:
CATIV 600V, CATIII 1000V
NOTE: These meters meet CAT III and CAT IV IEC 61010
standards. The IEC 61010 safety standard defines four over
voltage categories (CAT I to IV) based on the magnitude of
danger from transient impulses. CAT III meters are designed
to protect against transients in fixed-equipment installations
at the distribution level; CAT IV meters are designed to
