4
of explosion, implosion or release of toxic or flammable gases arising from
overheated materials.
11. The unit shall be operated only by qualified personnel.
Safety Information
Use high level of precaution against any electrical device. Before connecting
the electrical supply, check to see if the supply voltage is within the range
stated at the rating label, and see to it that the device be seated firmly. Place
the unit in a safe and dry location; it must NOT touch the surrounding. Follow
the safety precautions for chemicals / dangerous materials. If needed, please
contact qualified service representative or
Environmental Conditions
Ensure that the instrument is installed and operated strictly under the following
conditions:
1.
Indoor use only
2.
≤95% RH
3.
75 kPa
– 106 kPa
4.
Altitude must not exceed 2000 meters
5.
Ambient to 40°C operating temperature
6.
Pollution degree: 2
7.
Mains supply voltage fluctuations up to ±10% of the normal voltage
Avoiding Electrical Shock
Follow the guidelines below to ensure safe operation of the unit.
To avoid electrical shock:
1. NEVER connect or disconnect wire leads from the power supply unit when
the power supply unit is still on.
2. WAIT at least 5 seconds after stopping a run before handling output leads
or connected apparatus.
3. ALWAYS make sure that hands, work area, and instruments are
clean
and
dry
before making any connections or operating the power supply.
DOMINIQUE
DUTSCHER SAS