Major Manufacturing HIT-66-200, Instructions Manual

Page: 3 / 8

Attach the mortiser attachment to the HIT
-66 clamp set using the supplied
1/4-20 x 1-1/2” socket screws. The mor-
tiser is held to the HIT-66 clamp system
with two screws on top and two on the
bottom. Leave all screws loose at this
time.
Once all screws have been installed they
can be tightened.
Slide the mortise bit into the unit and
slide the stop collar on the end of the
shaft.
PAGE 3
Copyright 2012—Major Manufacturing Inc
NOTE: The HIT-66 clamps
shown are not part of the
HIT-66-200 mortiser set and
must be purchased as a
separate item.