background image

9

Majestic  •  MDVI30IN, MDVI35IN, MDVI30IL, MDVI35IL Owner’s Manual  • 2205-981 Rev. G  •  7/18  

F.  Lighting Instructions (IPI)

FOR YOUR SAFETY READ BEFORE LIGHTING

TO TURN OFF GAS TO APPLIANCE

1. This appliance is equipped with an ignition device which 

automatically lights the burner. DO NOT try to light the burner by hand.

1.  Equipped with wall switch: Turn ON/OFF switch to OFF.

 

Equipped with remote or wall control:  Press OFF button.

 

Equipped with thermostat:  Set temperature to lowest setting.

WARNING

WARNING:

NOT FOR USE WITH SOLID FUEL

GAS

VALVE

For additional information on operating your

refer to www.hearthnhome.com.

A.  This appliance is equipped with an intermittent pilot ignition (IPI) device which 

automatically lights the burner. 

DO NOT

 try to light the burner by hand.

B.

BEFORE LIGHTING

, smell all around the appliance area for gas.  Be sure to smell 

WHAT TO DO IF  YOU SMELL GAS

DO NOT 

try to light any appliance.

DO NOT

 touch any electric switch; do not use any phone in your building.

DO NOT CONNECT LINE VOLTAGE (110/120 VAC OR 220/240 VAC) TO THE CON-

TROL VALVE.

Improper installation, adjustment, alteration, service or maintenance can cause injury 

or property damage. Refer to the owner’s information manual provided with this ap-

agency or the gas supplier.
This appliance needs fresh air for safe operation and must be installed so there are 

provisions for adequate combustion and ventilation air.

Hot while in operation. DO NOT touch. Keep children, clothing, furniture, gasoline 

DO NOT operate the appliance with 

 removed, cracked or 

broken. Replacement of the 

 should be done by a licensed or 

•   Immediately call your gas supplier from a neighbor’s phone. Follow the gas sup-

plier’s instructions.


C.  Use only your hand to push in or turn the gas control knob.  Never use tools.  If 

the knob will not push in or turn by hand, 

DO NOT

D.

DO NOT

 use this appliance if any part has been under water. Immediately call 

the control system and any gas control which has been under water.

For use with natural gas and propane. A conversion kit, as supplied by the manufac-

turer, shall be used to convert this appliance to the alternate fuel.

This appliance must be installed in accordance with local codes, if any; if none,  

follow the 

National Fuel Gas Code, ANSIZ223.1/ NFPA 54, or the National Gas and 

Propane Installation code, CSA B149.1.

LIGHTING INSTRUCTIONS (IPI)

2.

top of this label. If you do not smell gas, go to next step.

3.  To light the burner:    

 

Equipped with wall switch: Turn ON/OFF switch to ON.

  Equipped with remote or wall control:  Press ON or FLAME button. 

Equipped with thermostat: Set temperature to desired setting.                                                   

4.  If the appliance does not light after three tries, call your service technician or gas 

supplier.

2.  Service technician should turn off electric power to the control when performing 

service.

DANGER

HOT GLASS 

WILL CAUSE BURNS.

DO NOT TOUCH 

GLASS UNTIL COOLED.

NEVER

ALLOW CHILDREN TO TOUCH GLASS.

CAUTION:

A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this 

appliance and shall be installed for the protection of children and other at-risk individuals.

WARNING: 

This product and the fuels used to operate this 

product (liquid propane or natural gas), and the products 

of combustion of such fuels, can expose you to chemicals 

including benzene, which is known to the State of California to cause 

cancer and reproductive harm.  For more information go to: www.

P65Warnings.ca.gov.

Keep burner and control compartment clean. See installation and operating instructions 

accompanying appliance.

Summary of Contents for RUBY SERIES
























Reviews: