Majestic RSW 402 CURVE, Instruction Manual

Page: 14 / 25

P. 3
TO SET TIME, 12/24HR, CALENDAR, SNOOZE DURATION
1. Press and hold SET , hour digits flash. Press  or  to set hours.
2. Press SET . Minutes digits flash. Press  or  to set minutes.
3. Press SET . The display shows “ 24Hr” flash, press  or  to select 12Hr  24Hr . In 12Hr
mode, P (PM) LED will appear on the display to indicate afternoon time. There is no
AM indicator.
4. Press SET , “ 2016 ” digits flash. Press  or  button to set the year.
5. Press SET , month digit “1” (on the right) flash. Press  or  button to set the month.
6. Press SET , date digit “1” (on the left side) flash. Press  or  button to set the date.
7. Press SET, display shows 05 and flash. Press

or

button to set snooze duration from 5 to
60 minutes.
8. Press SET to return to normal mode or it will return to normal mode in around 10 seconds if no
further press of any other buttons.
TO SET ALARM
1. Press and hold AL 1.2 / ON.OFF , the A1 LED and the hour digit flashes. Press  or  to set
Alarm 1’s hours.
2. Press AL 1.2/ ON.OFF , the minute digits flash. Press

or

to set the Alarm 1’s minutes.
3. Press AL 1.2/ ON.OFF once, the LED display shows “ bu ”. To select the sound sources of your
alarm, press  or  to select :-
bu = wake-to-buzzer
rd = wake-to-radio
4. Press AL 1.2/ ON.OFF , “ 1-7 ” flashes, Press  or  to select weekly-weekday-weekend alarm:
1-7 = Monday to Sunday
1-5 = Monday to Friday only
6-7 = Saturday and Sunday only
1-1 = Single-day alarm : after the alarm sounds and is stopped, the A1 LED goes off.
Press AL1.2/ON.OFF to re-active another single-day alarm.
5. If “ rd ” ( wake-to-radio ) is selected, press  or  to select “ HI ” or “ LO ” for the volume of radio
you wake up to. This selection does not apply for “ bu ” (wake-to-buzzer).
6. Press AL 1.2/ ON.OFF , the A2 LED and the hour digits flash. Press  or  to set Alarm 2’s
hour. The repeat step 2 to 5 above to set alarm 2.
7. To store your alarm settings, press SET once (or if no button is pressed in around 10 seconds).
When the related alarm is turned on, it will be indicated by the appearance of the A1 and / or the A2
LED on the left side of the display.
Note: Alarm function only works when AC/DC adaptor is used to power the clock radio.