Majestic ONE AT Page 12 User Manual Download

Page: 12 / 17

• Remote-board pairing

•

Breaking remote-board connection

Turn on the remote and press ON/OFF Button to remote-board pairing page,

please follow the guide to complete pairing. When it's complete, the lights on

electric skateboard will not flash.
Press DEAD MANS TRIGGER to return to home page.

If there are any issues with pairing,

press DEAD MANS TRIGGER to break

the connection.

REMOTE CONTROL FUNCTIONS

• Braking mode level

• Changing the riding mode

Press ON/OFF Button to braking mode level, use CONTROL WHEEL to each
braking level. Press DEAD MANS TRIGGER to return to home page.

Press ON/OFF Button to speed mode page, use CONTROL WHEEL to chan

ge the mode. Press DEAD MANS TRIGGER to return to home page.

Ready to pair

Complete

Pairing

Stopped

Gentle

Up to 13 km/h

Medium

Up to 25 km/h

Hard

Up to max km/h

SPEED MODE

BRAKE MODE

SPEED MODE

BRAKE MODE

SPEED MODE

BRAKE MODE

Summary of Contents for ONE AT


















Search results

Summary of Contents for ONE AT

Reviews:

Related manuals for ONE AT

Brands by name

Popular brands

Majestic ONE AT, User Manual

Search results

Summary of Contents for ONE AT

Reviews:

Related manuals for ONE AT

Brands by name

Popular brands