Archangel Installation Guide
Page 7 of 17
4
Disassemble the glass-to-wall brackets, being careful not to damage the faceplates.
Ensure the clear plastic gaskets are inserted and wall screw plates facing inward (to the
wet side of the shower).
Align the brackets centrally to the slots in the glass panel, hold them in place and mark the screw
positions for the bracket onto the wall.
Put the brackets to one side and use the suction lifters to remove the glass panel.
Remove the floor channel, having marked its position, and unscrew and remove the wall channel.
Drill 7 mm holes into the wall where the brackets will be mounted and insert wall plugs.
Cut the floor and wall channels were marked earlier and file smooth.
View from wet side.
