10
majacraft
Firstly slide the bobbin on to the flyer shaft.
At this point screw the flyer on to the flyer shaft. It
may help to hold the pulley with your left hand and
tighten the flyer with your right (assuming you are
right handed).
8d
8e
Spring is directed toward the
right hand side of the bobbin
8b
8c
It is time to put on the tension knob and spring. Start by sliding
the loop on the tension spring onto the tension knob shaft. Use
the spring loop that does NOT have the brake band attached. Now
slide the tension knob into the hole on the head.
When looking at the wheel from the front (the pedal side), loop
the brake tension band over the top of the bobbin from the
right hand side over to the left hand side. Refer to the Majacraft
Spinning Manual for a more thorough description on setting the
tension.
Here is a more detailed image of the
arrangement of the tension spring.
8f
