6
Specifications
5
Log in WEB Page
[Device connection]
Step 1 Connect one end of the ground wire to a suitable position, and fix
the ground plate on the switch panel with washers and screws.
Step 2 Connect the power cord to the switch's power terminals.
Step 3 Connect the network cable to the RJ45 port of the switch.
Step 4 Insert the SFP optical module into the SFP port and connect the
fiber-to-fiber transceiver.
The device supports WEB management and configuration. The computer can
access the device through the Ethernet interface, and log in to the main
interface of the WEB server through the browser.
Configure the IP addresses of the computer and the device in the same
network segment and ensure that the computer and device can access
each other.
Enter the IP address of the device in the address bar of the computer
browser, the default IP address is 192.168.16.253.
Enter the user name and password of the device in the login page
Click the "OK" button to log in the WEB interface of the device.
MISCOM8028GX-4XGF-16GF-8GC/
MISCOM8028G-4XGF-8GC-16GT
MISCOM8028G-4GF-8GC-16GT/
MISCOM8028GX-20GF-8GC
Switch properties
Bandwidth
128Gbps
Cache size
3Mbit
MAC table
16K
Interface
Gigabit SFP port
1000Base-LX
SFP slot
10G SFP port
1G/10G
SFP+ interface
10/100/1000M
TX port
10/100/1000Base-TXRJ45 ports
Full-duplex/half-duplex adaptive, supports MDI/MDI-X adaptive
